FOR EASY SET-UP AND OPERATION OF YOUR NEW LAMINATOR
Laminating Film
Follow the Instructions that are on the feed tray, so that the film is put on correctly.
Temperature
Make sure that the thermometer Experience is in the heat shoe and not behind it. Please Do Not plug the electrical cord into a smaller extension cord as power is reduced to wholesale jerseys the Laminator and therefore, does not let the laminator heat up properly. Let the machine heat up at cheap mlb jerseys least 1/2 hour! Warm up for 15 min, then run about 3″ of wholesale mlb jerseys film through, and wholesale nba jerseys then know… let the machine warm up another 15 min. (While heating up pull out feed tray, as this will prevent it from getting too warm!)
To Avoid Wrinkles
Make sure the Option Mandrels are in the key slots all the way. Check the tension, Pouch there should be a little drag on the rolls. (The StormTrooper tension is set by the setscrews, which are on the Mandrels). Check the Temperature. It should be Easy-Lam at about Gründungsf?rderung 310o – 325o for 1.5mil film.
Please read your operations manual.
Recent Comments